Numerology Store    Download  Video    Forum

Go Back -- Online Forum for the Numerology Music Sequencer > Eurorack Hardware > Vector Sequencer : News

Thread Tools Display Modes
Old 03-12-2019, 09:29 PM
adelag adelag is offline
Junior Member
Join Date: Dec 2016
Posts: 8
Default Velocity Outs - Shift & Twist

On the Global, Tempo, Routing page in the manual it says: "For Velocity outs, Shift & twist to assign it to one of the sub-sequencers of a part." I'm not sure I understand how this works...

What an amazing module this thing is!
Reply With Quote
Old 03-15-2019, 05:13 PM
jim jim is offline
Join Date: Nov 2008
Location: Albuquerque, NM
Posts: 4,529

So, when you turn the knob for a Velocity output assignment, it will normally go 'Part 1', 'Part 2', etc -- this sets the Velocity Out CV to a specific Part --- i.e. outputting the Velocity values for that part. So, the 'Vel1' physical CV output, by default, outputs velocity values for Part1, but it could instead output values from any other part. In addition, it can be set to output values from the sub-sequencers for a part *instead* of the velocity values.

... that's where the shift+twist comes in: When you hold down the shift key and turn the knob for a 'Vel' output on the routing page, the Part name will not change, but you will see something like "Part 1 S1", "Part 1 S2" or just "Part 1". This sets what the Velocity CV does for that part. Normally it's just the Velocity values, but if you see "S1" or "S2" that means the output will be the value from one of the sub-sequencers.

Reply With Quote
Old 03-17-2019, 07:54 PM
steve.turner steve.turner is offline
Join Date: Feb 2019
Posts: 54

Gonna write an acid jam on the Vector and call it Shift:Twist I reckon.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -6. The time now is 07:21 PM.

Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.