Numerology Store    Download  Video    Forum


Go Back   Five12.net -- Online Forum for the Numerology Music Sequencer > Eurorack Hardware > Vector Sequencer : News

Reply
 
Thread Tools Display Modes
  #1  
Old 10-31-2019, 08:15 PM
jim jim is offline
Administrator
 
Join Date: Nov 2008
Location: Albuquerque, NM
Posts: 4,546
Default Vector Sequencer Firmware 1.2.3

This build fixes an issue that could occur when saving projects.

Cheers,
Jim

http://files.five12.com/VS-1.2.3/VECTOR.BIN.zip

Release Notes:

1.2.3:
- Fixed a problem that could cause a blank dialog when saving a file.
- Fixed an issue that could keep the SD card from working properly when saving a file.



Vector Sequencer Firmware Update Instructions

• Download and un-zip the Vector firmware file (VECTOR.BIN.zip).
• Press and hold the Shift button while powering up the Vector to enter USB Disk mode.
• Use a USB ‘A to B’ cable to connect the Vector to your computer. After a few seconds,
the SD Card for the Vector will show up as a new disk.
• Unzip VECTOR.BIN.zip. On a Mac, the Finder may do that for you. Do not double-click on VECTOR.BIN,
which the Finder will try to de-compress into something not useful.
• Make sure the filename is exactly VECTOR.BIN, and copy it to the root directory of Vector’s SD Card – Delete
or move any previous VECTOR.BIN firmware files.
• Now is also a good time to backup your Vector's PROJECT directory.
• Unmount/Eject the Vector’s SD Card from your computer, and power off your eurorack system.
• Hold down the Rec button on the Vector while powering up your system.
• Press Next to load the new Firmware, which takes about 20 seconds.
• Verify the Firmware is the correct version in Globals -- first page, 2nd OLED, top-left corner.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:42 PM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.